Categories

Knowledge

Main purpose and type requirements for full steel seal end blind rivet
Jan 14, 2019

The full steel seal end blind rivet is used in the riveting when it is used, and the parts of the riveted part are connected by self-deformation or interference. When in use, it is a metal rod-shaped rod having one end, and after being inserted into the joined member, the other end is pressed at the outer end of the rod to press and fix the member.

In the riveting of the full steel seal end blind rivet, the parts of the riveted part are connected by self-deformation or interference. There are many types of rivets and they are informal. Common semi-circular rivets, flat rivets, countersunk rivets, semi-tubular rivets, solid rivets, rivets, step rivets, etc.

Applicaton of full steel seal end blind rivet

Iron-enclosed rivets are mainly used for riveting applications with large lateral loads when used, and are the most widely used.

The flat-cone rivet is resistant to corrosion due to the hypertrophy of the nail head, and is often used for rugged applications such as hull and boiler water tanks.

1. Countersunk head and 1200 countersunk rivets are mainly used for riveting applications where the surface must be smooth and with little load.

2. Semi-recessed head, 1200 semi-recessed rivets are mainly used for riveting applications where the surface must be smooth and with little load.

3. Flat rivets are used for riveting applications with normal loads.

4. Flat head and flat head rivets are mainly used for riveting of metal sheets or non-metallic materials such as leather, canvas and wood.

5. Large flat head rivets are mainly used for riveting of non-metallic materials.

6. Semi-tubular rivets are mainly used for riveting applications with small loads.

https://www.yukerivet.com/ 


  • QR CODE
  • facebook