Categories

Knowledge

Riveting process and structure type of single hand riveter gun
Dec 17, 2018

The single hand riveter gun is very convenient and versatile when used. It is more and more acceptable to the majority of manufacturers customers to the extent that it is efficient and easy to operate. The structure of the single hand riveter gun can be effectively divided into many. There are slide rail type and turntable type, but the principle is similar. The workpiece is displaced to the riveting area by setting, and then the riveting process is completed by the riveting machine.

The single hand riveter gun can be used to view the displacement of any workpiece as a result of movement in three directions. The X and Y axes control left and right and front and rear, and the Z axis controls up and down. Thus, a basic CNC structure is determined. CNC riveting machines generally have a zero point, which can also be called a reference point. Based on this point, we need to number and coordinate all the points that need riveting. This process is necessary, and then these coordinates and heights need to be input. The device's data is entered into the page, which lets the machine know how to rive those points, where they are, and how high.

After the single hand riveter gun enters the coordinates of these points, the degree of the equipment can be operated. The servo mechanism of the device will drive the workpiece to reach the first point of our input under the control of the program. At this position, the riveting workpiece should be just under the axis of the rivet head, the device also calculates the Z value of the coordinate, that is, the height value, to determine the feed amount of the riveting. After all the preparations are continued, the device can be riveted.

https://www.yukerivet.com/


  • QR CODE
  • facebook