How do the rivets on the board come off?

To remove the rivet, the rivet cap must be removed first. After the rivet cap is removed, the rivet can be flushed out with a drift.

If there are iron rivets on the board, how can I get them off?

If there are not many iron rivets, you can use a bench worker’s chisel to remove the rivet cap, and then use a punch to flush out the rivet, or you can use an angle grinder to grind off the rivet cap.

Step:

1. Insert a screwdriver into the gap of the rivet.

2. Press the rivet down with force, and the rivet edge will be opened by the action of lever.

3. The screwdriver continues to apply pressure along the edge of the rivet, so that the whole rivet is taken out.