FIXING-FASTENER-BLIND RIVET

10 Years Manufacturing Experience
  • jin801680@hotmail.com
  • 0086-13771485133

How to properly screw the riveting nut when mounting the tire?

If the rivet nut is screwed too tightly, the interface will rust, which is not conducive to disassembly. It is suggested that when you screw on the nut, first tighten it by hand, and then twist it half a turn with a wrench.

 When installing the tire, the screw should not be tightened, otherwise the screw will be deformed and the fixing effect will be affected. On the same tire, the looseness of each screw should be average. If there is no single screw, it should be very tight. Otherwise, the driving of the tire will be affected. In serious cases, the screw may break due to uneven force.

 When tightening the tires, it is best to employ a professional. If you do it yourself and tighten it one by one in diagonal order, each screw should be divided into several times to gradually increase the strength, so as to ensure that the rivet nut has enough strength. Do not use too much strength.


Post time: Jul-28-2021