-
Q&A
Q：How many lengths of rivets can be used on plates with corresponding thickness? How to determine how long rivets should be used for two 3mm iron plates？ A： Rod length = sum of thickness of two plates + rivet diameter x1.6 ——— rivet half round head Rod length = sum of thick...Read more -
Introduction to the advantages of rivet nuts
Advantages of rivet nut: 1. Pneumatic or manual riveter can be used for one-time riveting, which is convenient and firm. It is developed to solve the shortcomings of easy melting of welding nuts of thin metal sheet and thin pipe and easy sliding of tapping internal threads. It does not need to ...Read more -
Main uses of rivet nuts？
In order to solve the shortcomings of thin metal sheet and thin pipe, such as easy melting of welding nuts and easy sliding of internal threads, pull riveting nuts have been developed. At present, they are used in the assembly of electromechanical and light industrial products such as automobile,...Read more -
Shipping Efficiency of YUKE-GB12618 BLIND RIVET
During our business ,We always look for more convenient for client ,We also provide BTC to client for some regular items. We will choose proper platform or cargo .Some blind rivet is light and it is easy to delivery by express ,The cost is within most client tolerance. Q1. D...Read more -
Causes of waste products in the use of blind rivets
In contact, the incorrect form of waste products will be produced due to improper selection of blind rivets or inaccurate calculation method of rivet operation when pulling tools. The common forms of waste products are: the rivet head is skewed；the rivet head is not smooth；the rivet head is too...Read more -
How to avoid the waste products produced in the use of pop rivets？
1. Correctly calculate the rivet length, drill holes and make the upper and lower rivets concentric. 2. Check the proper strength and speed of the cover die and polishing hammer. 3. Calculate the length of rivet rod correctly. 4. Accurately hammer the target perpendicular to the workpiece. ...Read more -
How to apply riveted nut to metal plate correctly?
1、 It is necessary to drill a hole in the gold plate. The pressure rivet nut is installed with sheet metal. The hardness of stainless steel plate must be less than 80RB, and that of carbon steel plate must be less than 70rb. The minimum thickness of rivet steel plate is 0.8mm. It is accurately c...Read more -
Is the rivet nut too tight in use?
In daily life, there are quite a few cases of screwing and riveting nuts, especially in some repair shops. However, amateurs always feel that as long as they screw nuts more tightly, they will not have problems. In fact, it's a big mistake. If they screw nuts too tightly...Read more -
How to properly screw the riveting nut when mounting the tire?
If the rivet nut is screwed too tightly, the interface will rust, which is not conducive to disassembly. It is suggested that when you screw on the nut, first tighten it by hand, and then twist it half a turn with a wrench. When installing the tire, the screw should not...Read more -
How to choose pressure riveting nut and sheet metal stamping forming?
What’s the difference between them? 1. This process is usually riveted, sometimes just need to avoid this position. 2. Sprouting economy but unstable quality. Pressure rivet spiral column riveted to 1.5mm aluminum plate metal, spiral column groove depth and back cap should be designed how t...Read more -
You don’t know these kinds of blind rivets
Rivets come in many forms. They all use their own deformation or interference to connect riveted parts. The common rivets are pop rivets, R-type rivets, fan rivets, tree type rivets, half round head rivets, flat head rivets, half hollow rivets, etc. Different blind rivets are used in different co...Read more -
What should be paid attention to when rivet nut is used in sheet metal？
Rivet nut, also known as self tightening nut, is a kind of nut used for thin plate or thin plate. Its shape is round, and one end has relief teeth and guide groove. In general, the use of metal plate will show the problem of too far rivet nut hole, as well as the deformation after pressing and r...Read more