-
Use environment of blind rivets
The meaning of metal corrosion protection: metal by the impact of the environment, chemical or electrochemical reaction caused by the destructive damage, known as corrosion. Metal corrosion will cause huge equipment maintenance cost or even more serious economic losses, such as increased ...Read more -
What is the reason for the fracture of the pull rivet?
1. Pull rivet does not meet the tension of the screw core, and the breakpoint force and heat treatment of the core itself are lacking. 2. The rivet core has been damaged before working. 3. The rivet claw is not well checked and not within the horizontal range. 4. The riveting pressure is n...Read more -
How to choose a good blind rivet
1. Pull rivets of the same material as the workpiece are selected; 2. When the surface of the workpiece needs to be smooth, select the countersunk head to pull the rivet; 3. The diameter of blind rivet material is more than the diameter of pull rivet, about 0.1mm 4, blind rivet common material j...Read more -
What are the surface treatments for pulling rivets?
1.Zinc plating: zinc coating is obtained by point solution; 2.Baking paint: baking paint is a layer of paint applied on the surface of riveting body by thermal spraying technology.The paint color of blind rivets can be either on the RAI color card or provided according to the demand. 3.Ano...Read more -
Quality inspection of rivets
1.Tensile resistance: rivet rivet installation, the two sides of the workpiece produced an axial clamping effect.The axial pull force is applied to the riveted plates on both sides, gradually increasing the pull force to make the riveting bar extend, plastic deformation, until the fracture of the...Read more -
Why is the core rivet mainly used for smooth surface occasions
Blind rivet is an important tool for riveting, riveting generally requires double-sided operation.Riveting is the use of the perforated metal cylinder or tube is slightly smaller in diameter (rivet), need through the riveting artifacts, and two end knock or pressure of rivet, deform the metal col...Read more