-
Open End Core Pulling Blind Rivets
Blind rivets can be fastened to metal, plastic, composites, wood, and fiberboard.
Suitable for one side operation.
-
Tri-Grip Rivets
The Latern blind rivet can form 3 large folding feet, which are distributed over a large area and disperse the load of riveting surface.This feature allows lantern rivets to be used on fragile or soft materials, as well as for riveting large holes and irregularly shaped holes.
-
POP Rivet Countersunk 120 Degrees All Steel
CSK BLIND RIVET 120 degree rivet is widely used on special flat surface.
Both sides are very flat after riveting.
-
Open type Steel aluminum pop rivets
Ome head blind rivet introduction is divided into two portions (nail shell) rivet body and mandrel. And our product is easy to operate and has high installation efficiency.
-
GB12618 Aluminum blind rivet
· Diameter: 1/8 ~ 3/16″ (3.2 ~ 4.8mm ) 6.4 series
· Length: 0.297 ~ 1.026″ (8~ 25mm )
· Riveting range: 0.031 ~ 0.75″(0.8~ 19mm ) Lengthened、4.8 series to 25mm 6.4 series to 30 mm
-
Threaded Inserts Rivet Nuts
Rivet nuts are used primarily to install threads in sheet or platemetal where a drilled and tapped thread is not an option.
-
Rivet Nut With Countersunk Head And Knurled Shank
This Nut sert provide increased strength in punched and drilled holes .Knurled body provides a higher resistance to spin out when installed in soft materials.
-
Flat head riveting nut
Flat head riveting nut is a direct substitute for welding nut, which is connected with riveter and can be finished in one time Shape, beautiful and durable.
-
Rivet Nut Flanged Full Hex Open End
They are used in the fastening field of various metal plates, pipes and other manufacturing industries. It does not need tapping internal threads, welding nuts, firm riveting, high efficiency and convenient use.
-
Flat Head Rivet Nuts
This Nut sert provide increased strength in punched and drilled holes .Knurled body provides a higher resistance to spin out when installed in soft materials.
-
Stainless steel closed end rivets
Closed end rivet is a new type of blind rivet fastener. Closed rivet not only has the characteristics of easy use, high efficiency, low noise, reduction of labor intensity and so on, but also has the characteristics of good sealing performance of the connector and no rust in the rivet core of the closed rivet after riveting.
-
Painted Aluminum Rivet
Item: Painted Aluminum Rivet
Diameter:3.2~6.4mm
Material:Aluminium body/alum mandrel.
Length :5~35mm
Package: Bulk packing,box packing
One carton weight is below 28 kgs.
Delivery :15~25 days after signed contract and deposit.
Standad:DIN7337.GB.ISO