-
Rivet Nut With Countersunk Head And Knurled Shank
This Nut sert provide increased strength in punched and drilled holes .Knurled body provides a higher resistance to spin out when installed in soft materials.
-
Threaded Inserts Rivet Nuts
Rivet nuts are used primarily to install threads in sheet or platemetal where a drilled and tapped thread is not an option.
-
Aluminum blind rivet wide-grip
Large flange blind rivets: Compared with common blind rivet, the diameter of the rivet cap of the rivet is significantly larger. When the rivet is riveted with a connecting piece, the rivet has a larger contact area and a stronger supporting surface, thus enhancing torque strength and withstanding higher radial pulling force. Applicable industries: suitable for fastening soft and fragile surface materials and oversize holes, increasing brim diameter has special protection application for soft materials
-
GB12618 Aluminum blind rivet
· Diameter: 1/8 ~ 3/16″ (3.2 ~ 4.8mm ) 6.4 series
· Length: 0.297 ~ 1.026″ (8~ 25mm )
· Riveting range: 0.031 ~ 0.75″(0.8~ 19mm ) Lengthened、4.8 series to 25mm 6.4 series to 30 mm
-
Open type Steel aluminum pop rivets
Ome head blind rivet introduction is divided into two portions (nail shell) rivet body and mandrel. And our product is easy to operate and has high installation efficiency.
-
Open End Core Pulling Blind Rivets
Blind rivets can be fastened to metal, plastic, composites, wood, and fiberboard.
Suitable for one side operation.
-
POP Rivet Countersunk 120 Degrees All Steel
CSK BLIND RIVET 120 degree rivet is widely used on special flat surface.
Both sides are very flat after riveting.
-
-
Tri-Grip Rivets
Tri-grip rivets is also called lantern blind rivet. Lantern blind rivet can form 3 large folding feet, which are distributed over a large area and disperse the load of riveting surface.This feature allows lantern rivets to be used on fragile or soft materials, as well as for riveting large holes and irregularly shaped holes.
-
Wide Flange Aluminum Pop Rivets
It is widely used in different field.
-
Flat Head Rivet Nuts
This Nut sert provide increased strength in punched and drilled holes .Knurled body provides a higher resistance to spin out when installed in soft materials.
-
Open End Tubular Rivets
Item: Open End Tubular Rivets
Material: Aluminium .Steel.Stainless steel.
Finsh : Polish .Zinc plated,Painted.
Key words: Open End Tubular Rivets
Waterproof and good sealing performance.