If the nut of a product needs to be installed on the outside, and the inner space is narrow, it is impossible for the indenter of the riveter to enter for riveting, and the sprouting and other methods cannot meet the strength requirements, then neither riveting nor expanding riveting is feasible. Pull riveting must be used.
This method is applicable to the fastening field of plates and pipes (0.5mm-6mm) with various thicknesses. Pneumatic or manual riveter can be used for one-time riveting, which is convenient and firm; Replace the traditional welding nut to make up for the shortcomings of thin metal sheet, thin pipe welding, fusibility, unsmooth welding nut and so on.
Post time: Nov-03-2021