Some problems that may occur during the riveting process of open rivets

● What happens when the head of an open round head rivet falls out after riveting?

A：There are two scenarios for this

1: During the assembly of the core pulling rivet, there was pressure damage on the pipe cap,

2: The material of the blind rivet pipe cap is too hard, so there is a sign of turning around.

● What is the shaking of the rivet head after the open-end rivet is riveted?

1: please confirm whether the pressure of the riveting machine is sufficient;

2: please confirm whether the size of the rivet opening is correct;

3： please confirm whether the rivet allowance is too long;

4：please confirm if the rivet head cavity is correct.

● How to remove open flat round head pop rivets?

1. Drill out the open flat round head pop rivet core with a hand electric drill;

2. It’s okay to have a hand grinder, but without a hand electric drill,

3. If there are no two options, you can use a file to file the open flat round head blind rivet head thinner and use a steel nail to knock it in.