-
Open End Blind Rivets With Break Pull Mandrel
Advantages of open rivets：
Riveting tight, low cost
Wide application range
-
Large Flange Oversize All Steel Pop Rivets
Large Flange Oversize All Steel Pop Rivets have a larger washer on the hat than standard POP Rivets. They are used to connect two pieces of material in quick, efficient way. Large flange POP Rivets are tubular, comprised of a hat and mandrel; the length of the mandrel is snapped off when installed.
-
Round Body Countersunk Head Rivet Nut
It is widely used in the assembly of electromechanical and light industrial products such as automobile, aviation, refrigeration, elevator, switch, instrument, furniture and decoration.
-
Rivet Nut With Countersunk Head And Knurled Shank
This Nut sert provide increased strength in punched and drilled holes .Knurled body provides a higher resistance to spin out when installed in soft materials.
-
Rivet Nut Flanged Full Hex Open End
They are used in the fastening field of various metal plates, pipes and other manufacturing industries. It does not need tapping internal threads, welding nuts, firm riveting, high efficiency and convenient use.
-
Stainless steel closed end rivets
Closed end rivet is a new type of blind rivet fastener. Closed rivet not only has the characteristics of easy use, high efficiency, low noise, reduction of labor intensity and so on, but also has the characteristics of good sealing performance of the connector and no rust in the rivet core of the closed rivet after riveting.
-
Large Flange Oversize All Steel Pop Rivets
Large Flange Oversize All Steel Pop Rivets have a larger washer on the hat than standard POP Rivets. They are used to connect two pieces of material in quick, efficient way. Large flange POP Rivets are tubular, comprised of a hat and mandrel; the length of the mandrel is snapped off when installed.
-
Open type countersunk head aluminum blind pop rivet
Blind rivet is used for single-face riveting fasteners, and the general rivet, it does not need to be from the two sides of the connected piece riveting operation, therefore, can be used for some of the connected piece side due to structural constraints.
-
Steel Mandrel Dome Head Blind Rivet
Item: Full Steel Blind Rivet
Finish :Blue white zinc plated
-
Sealed Type Blind Rivet
The Sealed Type Blind River consists of two parts, rivets and nails. Rivet consists of nail rod and nail sleeve. When riveting, the rivet is first inserted into the nail hole of the connecting part, and then the nail sleeve is set on the working section groove of the riveting from the other side of the connecting part. It is suitable for places with high waterproofing requirements.
-
POP Rivet Countersunk 120 Degrees All Steel
CSK BLIND RIVET 120degree rivet is widely used on special flat surface.
-
Stainless steel closed end rivets
Closed end rivet is a new type of blind rivet fastener. Closed rivet not only has the characteristics of easy use, high efficiency, low noise, reduction of labor intensity and so on, but also has the characteristics of good sealing performance of the connector and no rust in the rivet core of the closed rivet after riveting.