-
Multi-Grip Open End POP Rivets
Aluminium multigrip blind rivet can satisfy some special demand when fix two parts.
-
Multi Grip Blind Open End Dome POP Rivets
When the multigrip rivet nail is riveted, the nail core pulls the tail end of the rivet nail body into a double-drum or multi-drum shape, clamps the two structural parts to be riveted, and can reduce the pressure acting on the surface of the structural parts.
-
Countersunk Open End Blind POP Rivets
Countersunk Open End Blind POP Rivets can rivet different thickness or different soft and hard materials. They are the first choice for riveting metal, plastic and brittle materials.
-
Stainless steel open dome head blind POP rivet
Item : Stainless steel open dome head blind POP rivet
Standard:DIN7337.GB.IFI-114
Dia: ø 2.4~ ø 6.4mm
Length:5~35mm
Material:Stainless steel/stainless steel
-
Rivets Aluminum Steel Round Head
Alu/steel blind rivet
GB12618 ,RIVETS
REMACHE CIEGO
-
Csk head aluminum blind pop rivets
The countersunk head and 120 countersunk head rivets are mainly used for riveting occasions with smooth surface and small load.
-
Closed end blind rivet
Rivets is a hollow rivet, equipped with a screw stem, nailing stalk end of round collar shape, scale, operation rivet holes, first insert the snap rivets, using manual or pneumatic pull riveting gun | riveter clamp head rivets live terrier, nail biting, and to pull the rivet head pressure, pull force material softer rivet head outward expansion into flange form, so that the material together, and then a tensioning until the screw stem is pulled, the plate can be riveted.
Send email to us
-
Tri-Grip Rivets
The Latern blind rivet can form 3 large folding feet, which are distributed over a large area and disperse the load of riveting surface.This feature allows lantern rivets to be used on fragile
or soft materials, as well as for riveting large holes and irregularly shaped holes.
-
Sealed Type Blind Rivet
The Sealed Type Blind River consists of two parts, rivets and nails. Rivet consists of nail rod and nail sleeve. When riveting, the rivet is first inserted into the nail hole of the connecting part, and then the nail sleeve is set on the working section groove of the riveting from the other side of the connecting part. It is suitable for places with high waterproofing requirements.
-
Closed End Sealed Blind Pop Rivets
Closed end blind rivet is a new type of blind rivet fastener. Closed rivet not only has the characteristics of easy use, high efficiency, low noise, reduction of labor intensity and so on, but also has the characteristics of good sealing performance of the connector and no rust in the rivet core of the closed rivet after riveting.
-
Open End Blind Rivets With Break Pull Mandrel
Advantages of open rivets：
Riveting tight, low cost
Wide application range
-
Large Flange Oversize All Steel Pop Rivets
Large Flange Oversize All Steel Pop Rivets have a larger washer on the hat than standard POP Rivets. They are used to connect two pieces of material in quick, efficient way. Large flange POP Rivets are tubular, comprised of a hat and mandrel; the length of the mandrel is snapped off when installed.
-
Stainless steel closed end rivets
Closed end rivet is a new type of blind rivet fastener. Closed rivet not only has the characteristics of easy use, high efficiency, low noise, reduction of labor intensity and so on, but also has the characteristics of good sealing performance of the connector and no rust in the rivet core of the closed rivet after riveting.
-
Large Flange Oversize All Steel Pop Rivets
Large Flange Oversize All Steel Pop Rivets have a larger washer on the hat than standard POP Rivets. They are used to connect two pieces of material in quick, efficient way. Large flange POP Rivets are tubular, comprised of a hat and mandrel; the length of the mandrel is snapped off when installed.
-
Open type countersunk head aluminum blind pop rivet
Blind rivet is used for single-face riveting fasteners, and the general rivet, it does not need to be from the two sides of the connected piece riveting operation, therefore, can be used for some of the connected piece side due to structural constraints.
-
Steel Mandrel Dome Head Blind Rivet
Item: Full Steel Blind Rivet
Finish :Blue white zinc plated
-
Sealed Type Blind Rivet
The Sealed Type Blind River consists of two parts, rivets and nails. Rivet consists of nail rod and nail sleeve. When riveting, the rivet is first inserted into the nail hole of the connecting part, and then the nail sleeve is set on the working section groove of the riveting from the other side of the connecting part. It is suitable for places with high waterproofing requirements.
-
POP Rivet Countersunk 120 Degrees All Steel
CSK BLIND RIVET 120degree rivet is widely used on special flat surface.
-
Stainless steel closed end rivets
Closed end rivet is a new type of blind rivet fastener. Closed rivet not only has the characteristics of easy use, high efficiency, low noise, reduction of labor intensity and so on, but also has the characteristics of good sealing performance of the connector and no rust in the rivet core of the closed rivet after riveting.
-
Aluminum Domed Head Open End Core-pulling Blind Rivets
· Aluminum Domed Head Open End Core-pulling Blind Rivets
· GB12618 BLIND RIVET