-
Aluminum blind rivet wide-grip
Large flange blind rivets: Compared with common blind rivet, the diameter of the rivet cap of the rivet is significantly larger. When the rivet is riveted with a connecting piece, the rivet has a larger contact area and a stronger supporting surface, thus enhancing torque strength and withstanding higher radial pulling force. Applicable industries: suitable for fastening soft and fragile surface materials and oversize holes, increasing brim diameter has special protection application for soft materials
-
GB12618 Aluminum blind rivet
· Diameter: 1/8 ~ 3/16″ (3.2 ~ 4.8mm ) 6.4 series
· Length: 0.297 ~ 1.026″ (8~ 25mm )
· Riveting range: 0.031 ~ 0.75″(0.8~ 19mm ) Lengthened、4.8 series to 25mm 6.4 series to 30 mm
-
Open type Steel aluminum pop rivets
Ome head blind rivet introduction is divided into two portions (nail shell) rivet body and mandrel. And our product is easy to operate and has high installation efficiency.
-
Open End Core Pulling Blind Rivets
Blind rivets can be fastened to metal, plastic, composites, wood, and fiberboard.
Suitable for one side operation.
-
POP Rivet Countersunk 120 Degrees All Steel
CSK BLIND RIVET 120 degree rivet is widely used on special flat surface.
Both sides are very flat after riveting.
-
Thread Rivet Nut Rivnut Insert
The open end insert is a blind rivet nut threaded insert designed to provide load bearing threads in thin sheet materials. The large flange version gives the Thin Sheet Nutsert rivet nut a greater load bearing surface while a closed end prevents the possibility of dirt and fluids into the thread in applications such as electrical circuits.
-
-
Tri-Grip Rivets
Tri-grip rivets is also called lantern blind rivet. Lantern blind rivet can form 3 large folding feet, which are distributed over a large area and disperse the load of riveting surface.This feature allows lantern rivets to be used on fragile or soft materials, as well as for riveting large holes and irregularly shaped holes.
-
Wide Flange Aluminum Pop Rivets
It is widely used in different field.
-
Full Steel Dome Head Blind Rivet With Large Head
This dome head blind rivet products are made of steel. It can be more durable, more worry-free, more flexible and more fashionable. It has high plasticity, good fatigue resistance, and is hard and thick. And it can be applied to various fields.
-
Full Steel Seal End Blind Rivet
Steel Seal end blind rivet is a blind rivet new fastener. It not only has the advantages of convenient use, high efficiency, low noise, and can reduce labor intensity, etc.
It has the characteristics of good sealing of the connecting piece and riveting of the core of the blind rivet without rust.
-
Aluminum Steel Seal End Blind Rivet
High quality waterproof factory Seal end blind rivets.
They are a low-cost, durable option you can use in place of spot welds, screws, or bolts,won’t rust or corrode,much stronger than aluminum rivets.