-
Flat Head Rivet Nuts
This Nut sert provide increased strength in punched and drilled holes .Knurled body provides a higher resistance to spin out when installed in soft materials.
-
M5 Countersunk Head Rivet Nut
The utility model does not need to tap internal threads, does not need to weld nuts, is riveted firmly, has high efficiency and is convenient to use.
-
Thread Rivet Nut Rivnut Insert
The open end insert is a blind rivet nut threaded insert designed to provide load bearing threads in thin sheet materials. In applications such as electrical circuits.
-
Tri-Fold Blind Rivet
Tri-Fold blind rivet forms three press lashes on the closing head side during setting. The large molded lashes distribute the exerted clamping force evenly and gently onto the riveted material. Also, the large surface of the lashes offer excellent protection against the rivet being pulled through very soft, porous or brittle application parts.
-
Full Steel High-strength Monobolt Blind Rivet
Monobolt high-strength blind rivets are high-strength structural blind rivets with locking rods and positive hole filling for heavy duty applications.Monobolt blind rivets are designed and developed for demanding applications where safety and performance are critical to customer needs.
-
Aluminum Peel End Blind Rivet
It is a new type of riveted fastener that is very convenient for riveting. It can show its unique advantages in the relatively small space or in the environment without rivet gun or the use of rivet gun. Two or more connected pieces can be riveted successfully by tapping the mandrel with a single object such as a hammer.
-
Full Stainless Steel Seal End Blind Rivet
The rivets are specially designed for manual installation. They can be pulled through the holes of the panel or the underframe. They are made of elastomer material and have good toughness. They can be installed quickly even in the interference assembly.
All stainless steel blind rivets are hard, have high tensile strength and high shear strength, and never rust.
-
Full Aluminum Seal End Blind Rivet
Aluminum Seal end blind rivet is a closed structure, like glass enclosed core-pulling rivet pin core head was locked inside the head of nail, pull rivet is completed, enclosed, the core pulling rivets head of nail tail is pulled in by fitting the outer edge of the hole, hole by fitting is completely closed to live, head of nail can guarantee no leakage, no leakage.
-
Aluminum Multi-Grip Blind Rivet
Multi-Grip rivets have a wide grip range, so a rivet can usually replace 2 or 3 normal rivets. Can reduce inventory and guess work. It is suitable for applications where different material thicknesses typically require several rivet sizes. This wide grip range increases design flexibility and reduces rivet inventory, which can save a lot of money. They also accommodate oversized holes and are resistant to vibration and moisture.
-
Structural Blind Rivet Hemlock Structural Blind Rivet
High tensile and shear strength.
High tightness.
The joints are completely watertight.
Single-side access.
Firm and high-quality joint, vibration-resistant due to its internal mandrel locking.
-
Full Stainless Steel CSK Head Blind Rivet
A countersunk rivet is a part that is riveted by its own deformation or interference connection.The screw head is completely or partially sunk into the connected piece. This structure is often used in applications where the surface is flat and smooth, such as the surface of the instrument.
-
Full Steel CSK Head Blind Rivet
We are the leader professional manufacturer of blind rivets in China, Our products are exquisite in workmanship, easy to save, and strictly control quality. It has a smooth surface, corrosion resistance, good stress and strong pressure. The riveting effect is good and the structure is compact.