-
After riveting, it should be inspected, including what aspects?
After riveting, it should be inspected: Firstly, the inspection of rivet appearance is generally divided into three parts. Firstly, the inspection of whether the appearance of a rivet is normal, whether the nut of the expansion rivet with holes is tilted, etc. This inspection also includes defec...Read more -
Selection of Materials for Stainless Steel Rivets
In specific situations, fastener materials need to meet severe corrosion or high strength conditions, resulting in many stainless steel rivets and ultra high strength stainless steel rivets. Fasteners are mechanical foundation components with a high demand. Usually, bolt...Read more -
How to install blind rivets without a rivet gun and a simple method for removing rivets
Installing blind rivets without a rivet gun There is no rivet gun, a hammer can be used instead of installing rivets. During riveting, the hammer strikes the rivet head to expose the core, making it flush with the end face of the rivet head, completing the riveting operation. Core piercing rivets...Read more -
Working principle and usage method of rivet nuts
Working principle of rivet nuts: Pull rivet nuts are a combination of the principles of blind rivets and welded nuts. Improve the thread strength of sheet metal materials and make them reusable. Riveting nuts can be used from one side of the applied parts. They are pre positioned devices attached...Read more -
How to loosen the rivet nut a bit
How to loosen the rivet nut a bit: If it is a nut that has not rusted or slipped, find a suitable wrench and turn it counterclockwise. If not, then： 1. Cola. Directly apply cola to the rusty screws and let it sit for a period of time, you will find that the screws are easily loosened. This is be...Read more -
Differences between flat head rivet nuts, countersunk head rivet nuts, and hexagonal head rivet nuts
Flat headed rivet nuts have two types of cylindrical parts: smooth and vertical, while vertical type rivet nuts are commonly used in the production process due to their anti slip effect. In the later stage of riveting, the head leaks into the thin plate, and flat headed rivet nuts are also the mo...Read more -
LABOR DAY HOLIDAY NOTICE
Labor Day is here! Wuxi Yuke Technology Co., Ltd. thank you for your continuous support and company! Happy holidays to you and your family! Pay attention to safety when traveling during the holidays and take precautions! According to the national holiday regulations and the actual situation of o...Read more -
Analysis of the Tightness of Blind Rivets
Tightness is one of the standards used to test the installation quality of pop rivets. With the development of modern industries, the number of users of pop rivets is constantly increasing, and more and more people are using them. Although pop rivets are widely used in daily life, it is also nece...Read more -
How to save pop rivets
Reason for needing to be well preserved: Blind rivets are a widely used material in the construction industry, used in various occasions that require fastening details. We should also pay attention to preserving it appropriately to ensure its quality and effectiveness when using it. 1. For blind ...Read more -
What is the cause of fracture of open end blind rivets?
1、 Pulling through: The rivet core of the rivet is pulled out from the rivet body as a whole, and the fracture of the rivet core is not broken, leaving a penetrating hole in the rivet body after riveting. The causes of pulling through phenomenon include: excessive pulling force of the nail core;...Read more -
Detailed explanation and working principle of pop rivets
The blind rivet is a kind of flying rivet for single-sided riveting, but it must be riveted with a special tool-pulling rivet gun (manual, electric, automatic). This type of rivet is especially suitable for riveting occasions where it is inconvenient to use ordinary rivets (riveting from both sid...Read more -
Considerations for selecting rivets
The early rivets were small pegs made of wood or bone. The early metal deformation body may be the ancestor of the rivets we know. There is no doubt that they are the ancient methods of metal connection known to mankind, which can be traced back to the early use of malleable metal. For example, i...Read more