-
What is the meaning of rivet pulling and its working principle
The meaning of pulling rivet is: A riveting method that uses manual or compressed air as power and uses special tools to deform special rivets and rivet the riveted parts together, belonging to a type of cold riveting. The main materials and tools used for riveting are pop rivets and pneumatic (o...Read more -
How to check if the rivet nut is loose and prevent it from loosening？
How to check if the rivet nut is loose: The reason for long-term loosening is that vibration usually occurs during the working process, and the working pressure also changes, which may cause deformation of the screw teeth and cause changes in the pre tightening force. Causing screws to loosen. T...Read more -
Structural Design of Rivet Connection
When designing riveted structures, it is usually based on the bearing capacity and specific requirements, selecting the riveting joint form according to the riveting specifications, and determining the relevant structural parameters, rivet diameter, and quantity. The material of rivets must have ...Read more -
Some common problems encountered when using aluminum pop rivets
● What is the reason for pulling through aluminum blind rivets? 1、 the gun head hole is too large. 2、 The pulling force of the nail rod is too large. There is a problem with the material. ● What is the reason for the cracking of aluminum rivets? 1、It is a problem with the quality of the rivet ...Read more -
What are the advantages and disadvantages of riveting compared to welding?
The advantages of riveting are: small deformation of the connection, low requirements for the connection environment, and construction can be carried out with wind, water, oil, etc., making it particularly suitable for connecting thin parts. The disadvantages of riveting are: low strength, poor ...Read more -
What defects are not allowed in riveting and what are the safety techniques for riveting?
Riveting should be firm and complete, which is necessary. In fact, it is best not to encounter the following situations when applying rivets: 1: Flanging cracks. 2: When riveting, the rivet rod is bent, causing it to be unable to be riveted. 3: The rivet material is too hard for the rotary rivete...Read more -
What are the methods of rivet connection
There are many connection methods for rivet connection, including ordinary riveting, sealed riveting, special riveting, interference fit, hand riveting, and impact riveting. Ordinary riveting For this connection method, the corresponding process is still simple, and the corresponding method is al...Read more -
Some problems that may occur during the riveting process of open rivets
● What happens when the head of an open round head rivet falls out after riveting? A：There are two scenarios for this 1: During the assembly of the core pulling rivet, there was pressure damage on the pipe cap, 2: The material of the blind rivet pipe cap is too hard, so there is a sign of turni...Read more -
How are rivets connected?
Passing rivets through prefabricated holes on the riveted parts to connect two or more riveted parts together, forming an inseparable connection, is called rivet connection, abbreviated as riveting. Riveting has the advantages of simple process equipment, seismic resistance, impact resistance, an...Read more -
What are the causes of riveting deformation?
The riveting process requires high precision, especially the control of deformation during the riveting process is the key to the riveting process. The riveting process is similar to the free forging process, in fact, it is the process of forming a rivet head under the action of external forces,...Read more -
What precautions should be taken when using rivet pulling tools?
The tools used when using rivets include manual rivet guns and pneumatic rivet guns. The manual rivet gun is operated by workers with both hands. First, the rivet gun is swung open, and then the rivet is inserted into the rivet gun. Align the part that needs to be anchored, and close the rivet g...Read more -
How to adjust the manual rivet gun
1. Firstly, prepare some rivets and a manual rivet gun. 2. Fully open the handle of the rivet gun with both hands, insert the rivet rod into the gun head, and make the gun head tightly adhere to the rivet brim. 3. Insert the riveting body into the riveting hole, so that the riveted plate is tig...Read more