-
Can all the riveted rivets be flat on both sides after riveting?
Can achieve the effect of flattening on both sides. Evacuated rivets are characterized by the fact that after the riveting is completed, there is no nail head falling off, and the two riveting surfaces of the product are relatively flat. https://www.yukerivet.com/news/what-should-i-do-if-there-i...Read more -
Do all aluminum blind rivets need a salt spray test?
Blind rivets are mostly made of aluminum, and lantern blind rivets can form 3 large corners, which are distributed over a large area and disperse the load on the riveting surface. This feature allows lantern blind rivets to be used on brittle or softer materials, as well as for riveting large and...Read more -
Do open round head blind rivets need a salt spray test?
Blind rivets do not make much sense for salt spray test! Why do you say that? Because the surface has changed after the rivet has been riveted and the electroplating layer has been destroyed, customers who have higher requirements on surface treatment are recommended to use stainless steel rivets...Read more -
How to distinguish waterproof lantern blind rivets from ordinary blind rivets?
Waterproof lantern blind rivets and ordinary blind rivets can be directly distinguished from the appearance. Waterproof lantern blind rivets are generally added with waterproof washers, and the brim is larger than that of ordinary lantern blind rivets. Usually, the nail rod will be twisted, and t...Read more -
What are the applications of riveting?
1. Active riveting. The joints can rotate relative to each other. Not a rigid connection. Such as: scissors, pliers. 2. Fixed riveting. The joints cannot move with each other. This is a rigid connection. Such as: angle ruler, nameplate on three-ring lock, bridge construction. 3. Close seam riveti...Read more -
What else can the closed oblate head blind rivets be called?
Closed oblate head blind rivets can also be called: Closed flat round head blind rivets, closed flat round head pull rivets, closed flat round head pull rivets, closed flat round pull rivets. https://www.yukerivet.com/news/what-are-the-surface-treatment-methods-for-anti-corrosion-of-closed-count...Read more -
What is the difference between blind rivets and traditional rivets?
Blind rivets: also called pull rivets, quick rivets. Mainly connect objects with light weight and thin thickness. Features Fast connection speed, convenient, popular, easy to buy. Traditional rivet: It is the shape of the nail. The flat end of the object is squeezed and deformed, which is larger ...Read more -
Why do blind rivets break the mandrel and not at the breakpoint of the pull stud? II
3. The claws of the nail gun are not adjusted properly and are not on the same plane. The claws play a shearing role on the nail core. 4. The air pressure of the riveting gun is not enough, and the claws are worn. The first riveting has caused damage to the mandrel, so that the tensile force of t...Read more -
Why do blind rivets break the mandrel and not at the breakpoint of the pull stud? I
1. The pulling force of the mandrel itself is not stable, the breaking point force is very close to the pulling force of the mandrel itself, or the heat treatment is not done, and the mandrel is brittle. 2. The mandrel has been damaged before the riveting. https://www.yukerivet.com/news/the-mand...Read more -
What’s the matter with the blind rivets being pulled continuously?
There are two situations in which blind rivets are continuously pulled: 1. The mouth of the nail gun is too large. 2. There is a problem with the quality of the pull stud, and the breakpoint of the pull rod has not been handled properly. https://www.yukerivet.com/news/application-method-of-rivet...Read more -
What does insufficient bulging of blind rivets mean?
Insufficient bulging: because the breaking force of the blind rivet is too low, the rivet has not been completely riveted, and the breaking point of the blind rivet is disconnected, resulting in insufficient bulging of the blind rivet. occurs under a failure. https://www.yukerivet.com/news/how-t...Read more -
What does blind rivet jumper mean?
Blind rivet jumping head: because the rivet does not wrap the nail head, it will cause the rivet jumping head. https://www.yukerivet.com/news/the-core-of-the-blind-rivet-is-not-completely-pulled-out-what-is-the-reason-for-the-fracture/Read more -
The core of the blind rivet is not completely pulled out, what is the reason for the fracture?Ⅱ
3. The nail head falls off: After riveting, the mandrel head cannot be wrapped and falls off from the rivet body. 4. Riveting body cracking: After pulling riveting, the riveting body has a longitudinal crack or is completely cracked. https://www.yukerivet.com/news/the-nail-cap-came-off-what-is-t...Read more -
The core of the blind rivet is not completely pulled out, what is the reason for the fracture?
1. Pull-through: The mandrel of the rivet is pulled out from the rivet body as a whole, and the fracture of the mandrel is not broken, leaving a through hole in the rivet body after riveting. 2. Burr: After riveting, the burr of the fracture of the mandrel penetrates outside the rivet body hole; ...Read more -
What is the reason for the cracking of the blind rivet body?
The reasons for the cracking of the rivet body are as follows: 1. The hardness of the blind rivet body is too high or not heat treated after annealing. 2. The diameter of the core cap of the blind rivet is too large. 3. The content of harmful impurities in the rivet body material of the blind riv...Read more -
After the blind rivet is pulled with a rivet gun, the mandrel falls out. Is it qualified?
This is not eligible. After the head of the blind rivet is broken, it should be stuck on the other side of the riveting plate. If it is pulled out directly, it may be that the material of the aluminum blind rivet is too soft or the wall thickness is too small, the deformation is too large, and th...Read more -
Why are the blind rivets skewed after riveting?
1. The selection of blind rivets is wrong. This is possible if the thickness to be riveted is lower than the maximum riveting thickness of the blind rivet. 2. The quality of the blind rivet itself. This problem may occur if the concentricity of the inner hole of the rivet head exceeds 0.15mm, or ...Read more -
How to solve if there is a penetrating cavity left in the riveting body after riveting?
1. Are you using an oversized rivet head or an oversized riveting hole? It is recommended that the riveting aperture is generally larger than the diameter of the riveting body by 0.1-0.2mm, and the gun head must be matched. 2. The quality of blind rivets should be replaced with new blind rivets.Read more -
The mandrel of the rivet has been completely pulled out. Is it qualified to leave a penetrating hole in the rivet body after riveting?
Unqualified, it belongs to the failure of riveting. As described above, the rivet at this time has no function of rivet, but only acts as a pin.Read more -
What is a closed blind rivet?
The closed blind rivet is a new type of blind riveting fastener. The closed rivet not only has the characteristics of convenient use, high efficiency, low noise, and can reduce labor intensity that the blind rivet has.Read more