FIXING-FASTENER-BLIND RIVET

10 Years Manufacturing Experience
  • jin801680@hotmail.com
  • 0086-13771485133

News

  • Manual blind rivet gun, what’s the matter with the rivet not being pressed tightly?

    Manual blind rivet gun, what’s the matter with the rivet not being pressed tightly?

    Reason: It is not the problem of the gun, but in the process of pulling the rivet, the two plates are not fixed together, which leads to a gap after riveting, which will shake. Suggestion: first fix the board with force, and then go to riveting to see if the same problem occurs. https://www.yuke...
    Read more
  • Can all the riveted rivets be flat on both sides after riveting?

    Can all the riveted rivets be flat on both sides after riveting?

    Can achieve the effect of flattening on both sides. Evacuated rivets are characterized by the fact that after the riveting is completed, there is no nail head falling off, and the two riveting surfaces of the product are relatively flat. https://www.yukerivet.com/news/what-should-i-do-if-there-i...
    Read more
  • What is the difference between open blind rivets and closed blind rivets?

    What is the difference between open blind rivets and closed blind rivets?

    Open-type blind rivets: the most widely used in the market, and the most common blind rivets. Among them, open-type oblate blind rivets are the most widely used, and countersunk head blind rivets are suitable for riveting occasions that require smooth performance. Closed blind rivet: It is a blin...
    Read more
  • Do all aluminum blind rivets need a salt spray test?

    Do all aluminum blind rivets need a salt spray test?

    Blind rivets are mostly made of aluminum, and lantern blind rivets can form 3 large corners, which are distributed over a large area and disperse the load on the riveting surface. This feature allows lantern blind rivets to be used on brittle or softer materials, as well as for riveting large and...
    Read more
  • Do open round head blind rivets need a salt spray test?

    Do open round head blind rivets need a salt spray test?

    Blind rivets do not make much sense for salt spray test! Why do you say that? Because the surface has changed after the rivet has been riveted and the electroplating layer has been destroyed, customers who have higher requirements on surface treatment are recommended to use stainless steel rivets...
    Read more
  • How to distinguish waterproof lantern blind rivets from ordinary blind rivets?

    How to distinguish waterproof lantern blind rivets from ordinary blind rivets?

    Waterproof lantern blind rivets and ordinary blind rivets can be directly distinguished from the appearance. Waterproof lantern blind rivets are generally added with waterproof washers, and the brim is larger than that of ordinary lantern blind rivets. Usually, the nail rod will be twisted, and t...
    Read more
  • How to fix if the rivet gun can’t be clamped?

    How to fix if the rivet gun can’t be clamped?

    Repair method: Unscrew the upper cover on the outside, then tighten the inside, and finally screw on the outer cover. https://www.yukerivet.com/news/application-method-of-rivet-gun-i/
    Read more
  • What are the applications of riveting?

    What are the applications of riveting?

    1. Active riveting. The joints can rotate relative to each other. Not a rigid connection. Such as: scissors, pliers. 2. Fixed riveting. The joints cannot move with each other. This is a rigid connection. Such as: angle ruler, nameplate on three-ring lock, bridge construction. 3. Close seam riveti...
    Read more
  • What else can the closed oblate head blind rivets be called?

    What else can the closed oblate head blind rivets be called?

    Closed oblate head blind rivets can also be called: Closed flat round head blind rivets, closed flat round head pull rivets, closed flat round head pull rivets, closed flat round pull rivets. https://www.yukerivet.com/news/what-are-the-surface-treatment-methods-for-anti-corrosion-of-closed-count...
    Read more
  • What is the difference between blind rivets and traditional rivets?

    What is the difference between blind rivets and traditional rivets?

    Blind rivets: also called pull rivets, quick rivets. Mainly connect objects with light weight and thin thickness. Features Fast connection speed, convenient, popular, easy to buy. Traditional rivet: It is the shape of the nail. The flat end of the object is squeezed and deformed, which is larger ...
    Read more
  • How to determine the length of blind rivets

    How to determine the length of blind rivets

    The opening size of the rivet hole is: min (minimum) + 0.1 max (maximum) + 0.2. The total thickness of the workpiece is generally 45%–65% of the length of the rivet, preferably not higher than 60%, and the working length should not be too short, usually 50%–60%. Example: If the total ...
    Read more
  • What are “rivets” and “riveting”?

    What are “rivets” and “riveting”?

    Rivet: In riveting, the parts that are riveted are connected by their own deformation or interference. Riveting: The use of rivets to connect two or more workpieces is called riveting. It would be wrong to say that riveting is a rigid connection. https://www.yukerivet.com/news/flat-head-blind-riv...
    Read more